Lite CD-22 CD Player Hi-End Top Loading 24Bit/192kHz black new

Product Price:

  • Product Model: Model: MUIA983683
  • Product Weight: Shipping Weight: 12kg
  • Product Quantity: 0 Units in Stock

Sold Out



paypal

Lite CD-22 CD Player Hi-End Top Loading 24Bit/192kHz
100% Brand New















Declaration


All items guaranteed 100% BRAND NEW in the original edition Box.

ONE-YEAR WARRANTY !!!

SPECIFICATIONS:

Operating System CD digital audio system : (CD, CD-R)
Frequency Response: 20Hz – 20kHz ± 0.2dB
Harmonic Distortion: < 0.001% @ 0dB, 1kHz
(Typically 0.0005%),
< 0.006% @ -30dB, 1kHz,
< 0.01% @ 0dB, 20kHz

Intermodulation Distortion: < 0.001% @ 0dB (Typically 0.0005%)
S/N Ratio (IHF-A Wtd.): 105 dB
Wow & Flutter: Quartz precision
Channel Separation: >100 dB @ 1kHz, >80 dB @ 20kHz
Output Voltage: 2.0Vrms
Digital Outputs: 75 Ohm Coaxial, RCA/ 110 Ohm Balanced AES/EBU, XLR/ Optical, Toslink
D/A Conversion: AD1853 Advance Segment, Balanced-Stereo DAC
Resolution/Sampling: 24 bits / 192 kHz
Oscillation: 3rd Overtone Oscillation
Crystal: Super precision, custom made
Jitter: <150 psec
Idle Pattern: <-115 dB
Stop band Rejection: <-78 dB
Power Supply: x2 high performance low noise R-core transformers

Power supply voltage: 110/220V 60Hz/50Hz
(100V,110V,120V, 127V, 230V, 240V version will
take 3-14 work days to order),
220V version is in stock

Power Consumption: < 15 W
Dimensions:(W x L x H) 432 x 330 x 80 (including feet)
Net weigh: 9Kg
Gross weight:12Kg

SETUP
CONNECTING MAINS POWER
Please refer to the rear panel view. The IEC connector of the supplied mains lead should beplugged into the socket (3) on the rear of the unit first and then plugged into the mains supply.The Mains power switch (6) is on the rear panel of the CD Player. This switch is normally lefton. If the unit is likely to be unattended for a long period, switch it off and unplug the mains lead from the wall.

SIGNAL CONNECTIONS
ANALOGUE OUTPUT:
The Analogue Output uses Gold plated RCA Phono sockets or XLR connectors and should beconnected to the CD or LINE input of your Preamplifier or Amplifier.

DIGITAL OUTPUT:
The Digital Output (2) uses a Gold plated RCA Phono socket for Coaxial SPDIF and Toslink for Optical and XLR for Balanced AES/EBU output. Any of these could be connected to a corresponding input of an amplifier with a digital input, or to an outboard Digital to Analogue converter (DAC).

IMPORTANT NOTE: For optimum performance it is recommended to use high quality
inter-connect cables for HI END audio.

OPERATION
Please refer to the rear panel view.
SWITCHING ON
The Mains power switch (6) is located on the rear panel of the CD Player. This switch should be left ON for normal operation. If unattended for a long period, the Mains power should be switched OFF and the lead disconnected from the power supply.
When switched ON from the rear panel, your CD-22 CD Player Display will illuminate in few seconds.

USING THE CONTROLS
Please refer to the top & front panel view.

LOADING A DISC
Place the disc on the spindle. Then place the CD-clamp on the spindle. The clamp now securely fastens the disc. When a disc has been loaded, your CD-22 CD Player will briefly spin the disc while it studies the data encoded on it in few seconds .The disc will then stop and the display will indicate the number of tracks on the disc and the total play time.
To commence playing a disc, press Play Button (2) once. The disc will play from the beginning. Press the Pause button (3) to pause the disc whilst it is playing. Pressing the Play Button (2) again will resume playback from the point at which Pause mode was entered. In Pause mode, the disc continues spinning and the laser will still be operational but locked. Please keep the CD player in Pause mode no longer than strictly necessary.

Warped discs should never be played.
If a disc is not inserted or if the disc is damaged or inserted upside down, the CD player
will remain inoperative (Display will indicate: no disc).

SELECTING A TRACK
Press the Track Forward Button (5) to go to the next track on the disc. Pressing the Track Back Button (4) will take you to the previous track.
***** When the disc is playing, press the Track Back Button once to take you to the beginning of the current track and a second time to take you to the start of the previous track. In Play mode press the Track Forward Button (5) to take you forward to the start of the next track. Once the procedure is complete the disc will commence playing from the selected track. When a disc is first loaded, you can use these buttons to select your desired track. Having done so, press the Play Button and your disc will commence playing from the selected track. You may select a track when Pause is engaged. In this case, the disc will revert to Pause after the procedure is complete and you will have to press Play Button to continue playing the disc.

REMOTE CONTROL
Your CD player is supplied with a Remote Control.
The Remote Control is powered by two 1.5V AAA batteries.
When inserting the batteries observe the correct polarity.

All products are manufactured passed China national CCC authentication .

This product was added to our catalog on Tuesday 31 July, 2012.